Do you want to own your own custom powerlifting belt? Of course you do! We have redesigned our custom weight lifting belts having thought long and hard about what we want them to be. We have decided to go for the best in terms of materials.
three LOADS OF options for the belt material:
Nubuck Leather: a soft brown nubuck leather outer which is approx 2.5mm thick (to allow for embroidery), then subsequent layers are made from buffalo leather and then a layer of suede which is around. Having a buffalo leather in the middle is significantly more expensive than many other weightlifting belts (you will often see thin layers of cardboard type material which is how some brands can sell cheap belts. We don’t do things like that, we want to give you a quality product that will last forever.
Cow Leather: A super soft leather outer with a textured appearance approx 2.5mm thick (again to allow for the embroidery needle to pass through), subsequently there are layers of buffalo leather and then a layer of suede. Available in a tonne of colours (see below)
Suede Leather: A super soft suede outer approx 2mm thick, subsequently there are layers of buffalo leather and then a layer of suede. Available in a tonne of colours (see below)
You can choose either a single prong, double prong, quick release or Lever. You can choose to go for either 10mm or 13mm thick belt. Please note if you request lever there will be a supplementary charge of £15 (inc VAT) to pay for the stainless steel lever.
ModiFit Powerlifting Belt – Sizing Information
The image below shows where you would sit on each of the belts. Each belt has 8 holes spaced over 7″, indicated by the red dots. For example, if your belly button measures 32″ you would sit on approximately the 7th of 8 holes on a Medium and the 3rd of 8 holes on a Large. In this instance a Large would be a better fit. It is better to be near the bottom of a larger belt than near the top of the smaller belt, as you will have more of the end of the belt to hold onto when tightening and loosening the belt. This is especially important on a powerlifting belt due to their thickness. Just to stress – we do not recommend buying a size where you are on either the first or last hole. If you are unsure of sizing please give us a call and we’ll be happy to help!
Please measure around your waist / belly button where the belt will sit. Do not rely on your jeans size / waist size as this may be different.
- Small: 22″ – 29″ (Belt length 90cm)
- Medium 26″ – 33″ (Belt length 100cm)
- Large 30″ – 37″ (Belt length 110cm)
- Extra Large 34″ – 41″ (Belt length 120cm)
- Double XL – 36″ – 43″ (Belt length 125cm)
- Triple XL – 38″ – 45″ (Belt length 130cm)
- 4XL – 42″ – 49″ (Belt length 140cm)
- 5XL – 46″ – 53″ (Belt length 150cm)
- 6XL – 50″ – 57″ (Belt length 160cm)
- 7XL – 54″ – 61″ (Belt length 170cm)
If you’d like a custom length drop us a message and we will quote for you. Sometimes this might add around £10 to the cost.
We’ve rated product performance for different training styles to make sure you’re choosing the best equipment for your needs!
|Metcons || |
|Heavy Squats || |
|Deadlifting || |
|Olympic Lifting || |
|Robustness || |
Meets IPF Spec – Not IPF Approved
These are to IPF spec from Technical Rule Book 2014 (updated January 2014). Please note, these are heavy duty powerlifting belts that will be really stiff when you first get it. If you’ve used a decent powerlifting belt before you will know this and know it takes a bit of time for it to break in! Fortunately, as these are our Elite belts, the leather is already pretty soft, so break-in time will be minimal!
Belt is 4″ wide (10cm).
Segment from IPF Rule Book detailing belt dimensions:
Competitors may wear a belt. If worn, it shall be on the outside of the lifting suit.
Materials and Construction:
(a) The main body shall be made of leather, vinyl or other similar non-stretch material in one or more laminations which may be glued and / or stitched together.
(b) It shall not have additional padding, bracing or supports of any material either on the surface or concealed within the laminations of the belt.
(c) The buckle shall be attached at one end of the belt by means of studs and / or stitching.
(d) The belt may have a buckle with one or two prongs or “quick release” type (“quick release” referring to lever.)
(e) A tongue loop shall be attached close to the buckle by means of studs / or stitching.
(f) The name of the lifter, the lifter’s nation, state or club may appear on the outside of the belt.
1. Width of belt maximum 10 cm.
2. Thickness of belt maximum 13 mm along the main length.
3. Inside width of buckle maximum 11 cm.
4. Outside width of buckle maximum 13 cm.
5. Tongue loop maximum width 5 cm.
6. Distance between end of belt and far end of tongue loop maximum 25 cm.
Leather Colour Options
There are a lot of different colour options as shown below. Not shown are White, Green and Nubuck / Suede leather.